ICSE Class 10 Geography Question 22 of 22

Waste Management — I Impact of Waste Accumulation — Question 2

Back to all questions
2
Question

Question 2

Waste accumulation is the most visible form of pollution, which creates global environmental challenges. State any three such challenges and their probable remedies.

Answer

Three global environmental challenges and their probable remedies are as follows:

Land and soil pollution

Both open dumps and landfills may contain toxins that seep into the soil and cause soil pollution. Scavengers and stray animals invade the open garbage dumps and spread the waste over a large area, thereby, spreading germs and diseases as well as destroying the beauty of the place.

Remedy

  1. Implement strict waste management practices, including proper landfill design, lining, and leachate collection systems.
  2. Promote waste reduction, recycling, and composting to minimize the amount of waste sent to landfills.

Air pollution

Improper waste incineration and open burning release harmful pollutants into the air, contributing to air pollution and respiratory health issues. As accumulated waste decomposes, it produces a large quantity of methane gas. This is highly inflammable, and can cause an explosion if not managed properly.

Remedy

  1. Promote waste-to-energy technologies that use proper incineration methods and emissions control systems.
  2. Encourage the adoption of cleaner energy sources and waste management strategies that prioritize recycling and composting over incineration.

Water pollution

Water pollution occurs when people discharge large amount of waste into water bodies, and the natural cleansing process in the water bodies cannot function properly. The process of eutrophication takes place due to introduction of nutrients and chemicals through discharge of domestic sewage, industrial effluents and fertilizers from agricultural fields. This causes death of most of the aquatic organisms, draining water of all its oxygen.

Remedy

  1. Implement effective waste management systems, including proper waste collection, recycling, and awareness campaigns to discourage littering.
  2. Encourage the use of reusable and sustainable materials to reduce plastic waste.

Chapter Overview: Waste Management

Waste Management is the collection, transport, processing, recycling, and disposal of waste materials. This chapter covers the classification of waste into biodegradable and non-biodegradable categories, solid waste management methods (composting, incineration, sanitary landfills), the three stages of sewage treatment (primary, secondary, tertiary), and the management of special waste categories including biomedical waste, electronic waste (e-waste), and nuclear waste. The 3Rs principle (Reduce, Reuse, Recycle) forms the foundation of sustainable waste management. India generates over 62 million tonnes of municipal solid waste annually, of which only about 20% is processed. The Swachh Bharat Abhiyan launched in 2014 aims to improve waste management across the country. Students must understand the differences between waste disposal methods, their advantages and limitations, and be able to suggest appropriate management strategies for different types of waste. The waste-to-energy concept, where non-recyclable waste is converted into electricity or fuel, is an emerging area of focus.

Key Definitions & Concepts

Term Definition
Biodegradable WasteWaste that can be decomposed by microorganisms into simpler, non-toxic substances (e.g., food scraps, paper, dead leaves, animal dung)
Non-biodegradable WasteWaste that cannot be broken down by natural biological processes; persists for hundreds of years (e.g., plastic, glass, metals, Styrofoam)
CompostingAerobic decomposition of organic waste by microorganisms to produce humus (nutrient-rich fertiliser)
VermicompostingComposting using earthworms (Eisenia fetida) to accelerate the decomposition of organic matter
IncinerationControlled burning of waste at 800–1000°C in specially designed furnaces; reduces volume by up to 90%
Sanitary LandfillEngineered waste disposal site with impermeable liner, leachate collection system, daily soil cover, and gas venting
LeachateContaminated liquid that drains from a landfill, containing dissolved organic and inorganic pollutants
BODBiochemical Oxygen Demand – the amount of dissolved oxygen needed by aerobic organisms to decompose organic matter in water; higher BOD indicates greater pollution
E-wasteDiscarded electronic devices containing hazardous materials (lead, mercury, cadmium) that require specialised recycling
3RsReduce (minimise waste), Reuse (use items again), Recycle (reprocess into new products) – the hierarchy of sustainable waste management
Waste-to-EnergyConversion of non-recyclable waste into electricity, heat, or fuel through incineration with energy recovery, gasification, or pyrolysis

Must-Know Concepts

  • Biodegradable waste decomposes naturally (days to months); non-biodegradable waste persists for centuries
  • 3Rs hierarchy: Reduce > Reuse > Recycle (prevention is better than treatment)
  • Composting is suitable only for organic/biodegradable waste; produces humus used as fertiliser
  • Incineration reduces volume by 90% and is essential for biomedical and hazardous waste
  • Sanitary landfill key features: impermeable liner + leachate collection + daily soil cover + gas venting
  • Sewage treatment has three stages: Primary (physical) → Secondary (biological) → Tertiary (chemical)
  • Secondary treatment reduces BOD by 85–90% using aerobic bacteria in aeration tanks
  • Biomedical waste uses colour-coded bins: Yellow, Red, Blue, White (puncture-proof for sharps)
  • E-waste contains heavy metals (lead, mercury, cadmium); managed through EPR and authorised recyclers
  • Nuclear waste management: vitrification (converting to glass), deep geological repositories, lead-lined containers
  • India generates 62 million tonnes of MSW annually; is the 3rd largest e-waste producer globally

Biodegradable vs Non-biodegradable Waste

Feature Biodegradable Waste Non-biodegradable Waste
DecompositionBroken down by microorganismsCannot be decomposed naturally
TimeDays to monthsHundreds to thousands of years
ExamplesVegetable peels, paper, cow dungPlastic, glass, aluminium cans
ManagementComposting, vermicomposting, biogasRecycling, incineration, sanitary landfill

Sewage Treatment Stages

Stage Type Process What is Removed
PrimaryPhysicalScreening, grit removal, sedimentationLarge debris, sand, suspended solids
SecondaryBiologicalAeration with activated sludge (bacteria)Dissolved organic matter (BOD reduced 85–90%)
TertiaryChemicalChlorination, UV treatment, filtrationPathogens, nutrients (N, P), colour, odour

Important Diagrams to Practice

  • Flow chart of sewage treatment (Primary → Secondary → Tertiary)
  • Cross-section of a sanitary landfill showing liner, waste layers, soil cover, leachate collection, gas venting
  • Waste management hierarchy pyramid (Prevention > Reuse > Recycling > Recovery > Disposal)
  • Colour-coded biomedical waste bins with waste categories

Common Mistakes

  • Confusing biodegradable with recyclable (paper is both; glass is recyclable but not biodegradable)
  • Swapping secondary (biological) and tertiary (chemical) stages of sewage treatment
  • Forgetting to mention the impermeable liner as the key feature of a sanitary landfill
  • Calling open burning “incineration” (incineration is controlled burning in a furnace with emission controls)
  • Not providing specific Indian examples when asked (Okhla WtE plant, E-Waste Rules 2016, Swachh Bharat)

Board Exam Tips

  • Use comparison tables for 5-mark answers (biodegradable vs non-biodegradable, composting vs incineration vs landfill)
  • Always define the term first, then explain with examples
  • For sewage treatment, draw a flow diagram if asked for explanation
  • Mention the 3Rs in order: Reduce → Reuse → Recycle with one example each
  • Know the colour-coded bins for biomedical waste (Yellow, Red, Blue, White)